Ricoh Gen5 Printhead For Mimaki SWJ-320

Sale!
Unopened Ricoh Gen5 printhead

Ricoh-Gen5

New product

Available for water ink & UV.
Both types can be supplies with short (14 cm) and long (50 cm) cables.
Please contact us by email to specify the head type and cable length.

$1,253.60

-20%

$1,567.00

Design Features
- 1280 channels
- Two color and four color support
- Single color: 600npi
- Two color: 300npi
- Four color: 150npi
- 8 level grey scale capability

Specification
Size: 89 x 25 x 69 mm excluding cable and connectors
Head materials: SST, Nickel alloy and epoxy adhesive, direct contact with ink
Compatible jetting fluids: Compatible with water, solvent, oil, UV curable inks
Nozzle plate surface: Coated SST
Number of nozzles: 4 x 320 channels
Nozzle spacing:
A: Within a single row: 0.1693 mm (1/150")
B: Within a color: 0.0847 mm (1/300")
C: Single Pass: 0.0423 mm (1/600")
D: Row to row distance: 0.55 mm
E: Color to color: 11.811 mm
Inkjet inlet port: 2 x dual ports
Piezo type: D33 staked PZT
Drop ejection mode: Piston pusher with metallic diaphragm plate
Integrated electronics: Low voltage serial to high voltage parallel converter; 3-bit shift resistors; transmission gate outputs
Temperature control: Integrated heater and thermistor
Viscosity: 11 cP at operating temperature
Surface tension: 32 dynes/cm
Native drop volume: 7 picoliter
Drop volume range/variation: 7-35 picoliter with grey scale +- 10%
Drop velocity nominal/variation: 7 m/sec/ +-15%
Crosstalk: 10% or less with all channels firing
Jet straightness 1 sigma: < 3.5 milliradian from nozzle radian
Native drop operation frequency: 60kHz Higher burst possible under ideal condition
Life: 100 billion actuation's per nozzle

Used on latest Mimaki SWJ-320 etc.

Related Products

Ricoh Gen4 printhead has the following specifications: 384 channels, 30 kHz, greyscale capability, two colour support, it has an integrated heater and thermistor. Ricoh Gen4 printhead is suitable for the wide range of water, solvent and UV printers.

$879.00
Quick view

This GEN5 UV printhead is suitable for a range of UV printers. It supports up to four colours and has a total of 1.280 nozzles. It is built with longevity and robustness in mind and used in the latest industrial inkjet printers. This is Ricoh original printhead and it is covered by a manufacturer warranty. This Ricoh GEN5 is available in two different...

$1,657.00
Quick view

This GEN5 UV printhead is suitable for a range of water printers. It supports up to four colours and has a total of 1.280 nozzles. It is built with longevity and robustness in mind and used in the latest industrial inkjet printers. This is Ricoh original printhead and it is covered by a manufacturer warranty. This Ricoh GEN5 is available in two different...

$1,712.00
Quick view

This Ricoh GEN4 (MH2420), 384 channels, 30 kHz, 7 picoliter, greyscale printhead is suitable for Mimaki UJF-3042 printers. This printhead has an integrated heater and thermistor. This is the Ricoh original printhead, covered by a manufacturer warranty.

$942.00
Quick view

This Ricoh GEN3-E3 (MH1603/1803/1903) printhead is suitable for DYSS Apollo UV R220 printers. This is the original Ricoh part.

$1,162.00
Quick view

The Ricoh GEN4 greyscale printhead is suitable for a range of water, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This Ricoh GEN4 is available in two different cable lengths: 19cm long and 44cm long and a choice of hose barb ink inlet or...

$851.00
Quick view

Printer compatibility: AmicaSystems PA32

$1,119.00
Quick view

The new Ricoh GEN4L printhead is suitable for a range of oil, water, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty.

$1,119.00
Quick view

Top